Skip to Main Content

Introduction

Thoracoscopy, video-assisted thoracic surgery (VATS), and thoracotomy are well-established surgical techniques used by thoracic surgeons to diagnose benign and malignant diseases involving the thorax.

Thoracoscopy first emerged as a diagnostic tool in the early 20th century when therapeutic pneumothorax became the surgical treatment of choice for tuberculosis. In 1910, Hans Christian Jacobaeus performed the first thoracoscopic intrapleural pneumolysis for collapse therapy in the treatment of tuberculosis.13 He used a rigid cystoscope with a light source to access the pleural cavity and perform a pneumolysis. After development of effective antimicrobial therapy for tuberculosis, thoracoscopy evolved as an effective diagnostic procedure to evaluate pleural effusions and pleural disease.4 During direct diagnostic thoracoscopy, a fiberoptic mediastinoscope or bronchoscope was placed through a small intercostal incision; pleural fluid could be aspirated and sent for analysis (Fig. 37-1). In addition, the parietal pleura, visceral pleura, fissures, hilum, and diaphragm could be inspected directly.5

Figure 37-1

Use of a rigid bronchoscope as a thoracoscope.

By 1990, thoracoscopy evolved into VATS. Development of high-resolution video cameras and endoscopic linear mechanical stapling devices allowed the expansion of application of VATS into the diagnosis and treatment of pulmonary nodules and interstitial lung diseases (ILDs).6,7 The use of diagnostic thoracotomy has declined significantly since the emergence of VATS; however, the diagnostic thoracotomy may be necessary in cases in which VATS is not ­feasible (Table 37-1).

Table 37-1Contraindications to Video-Assisted Thoracic Surgery (VATS)

Technical Considerations

VATS is performed in the operating room under general anesthesia. A double-lumen tube is placed to isolate the lungs to enable establishment of one-lung ventilation, which is essential for performing the procedure. The use of one-lung ventilation creates sufficient space for maneuvering within the hemithorax to perform the planned procedure. Carbon dioxide (CO2) insufflation can also be used to provide additional working space within the chest cavity by lowering the position of the diaphragm. The more inferiorly located diaphragm provides better exposure of the costophrenic sulci and lower lobes. When CO2 is used, the maximum insufflation pressure is maintained below 6 mm Hg to avoid decreased venous return to the right heart and associated hypotension.

The typical VATS procedure utilizes three to four incisions that range from 5 to 12 mm in size. The incisions are usually arranged in a triangular configuration, with the area of interest located in the center of the triangle. (Fig. 37-2) A 5- or 10-mm ...

Pop-up div Successfully Displayed

This div only appears when the trigger link is hovered over. Otherwise it is hidden from view.